How to print or access value of UDV (User defined variables)

To print or access UDV use following syntax
Syntax: 
$variablename

Define variable vech and n as follows:
$ vech=Bus
$ n=10
To print contains of variable 'vech' type
$ echo $vech
It will print 'Bus',To print contains of variable 'n' type command as follows
$ echo $n

Caution: Do not try $ echo vech, as it will print vech instead its value 'Bus' and $ echo n, as it will print n instead its value '10', You must use $ followed by variable name.

Exercise 
Q.1.How to Define variable x with value 10 and print it on screen.
Q.2.How to Define variable xn with value Rani and print it on screen
Q.3.How to print sum of two numbers, let's say 6 and 3?
Q.4.How to define two variable x=20, y=5 and then to print division of x and y (i.e. x/y)

Q.5.Modify above and store division of x and y to variable called z
Q.6.Point out error if any in following script

$ vi variscript # # # Script to test MY knowledge about variables! # myname=Vivek myos = TroubleOS myno=5 echo "My name is $myname" echo "My os is $myos" echo "My number is myno, can you see this number"

For Answers Click here