Enable the tftp server
nano /etc/xinetd.d/tftp
change “disable=yes” to “disable=no”
(Ctrl-X>y>ENTER)
nano /etc/xinetd.d/tftp
change “disable=yes” to “disable=no”
(Ctrl-X>y>ENTER)
Ensure Hard Drive SMART monitoring is enabled (if using SATA hardware RAID then disable)
chkconfig smartd on
chkconfig smartd on
Configure the network time server for managing the time displayed on the server and the phones.nano +21 /etc/ntp.conf
restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap
server 0.rhel.pool.ntp.org
server 1.rhel.pool.ntp.org
server 2.rhel.pool.ntp.org
server 0.rhel.pool.ntp.org
server 1.rhel.pool.ntp.org
server 2.rhel.pool.ntp.org
Leave everything else at defaults. Any other lines that start with “restrict” should be commented out “#”
Configure time server to start at boot/sbin/chkconfig --level 345 ntpd on
No comments:
Post a Comment