EIGRP Redistribution of Different AS(Autonomous System) configuration on GNS3

In this tutorial i will show you that how to communicate the two different AS(Autonomous System) in gns3. EIGRP Redistribution of Different AS are need to performed on edge router having different AS configure on it. For this i have create a lab in gns3, in our topology R3 is the router on which we shall perform redistribution. For IP and EIGRP configuration you can visit EIGRP configuration on GNS3. But you need to make some changes on R3, R5 and R6 i.e. run "router rigrp 200" instead of "router rigrp 100".  

EIGRP Redistribution Commands:

R3(config)#config t

R3(config)#router eigrp 200

R3(config-router)#network 3.3.3.0 0.0.0.255

R3(config-router)#network 4.4.4.0 0.0.0.255

R3(config)#exit

R3(config)#router eigrp 100

R3(config-router)#network 2.2.2.0 0.0.0.255

R3(config)#router eigrp 100

R3(config-router)#redistribute eigrp 200

R3(config-router)#ex

R3(config)#router eigrp 200

R3(config-router)#redistribute eigrp 100

Verification:

R2#show ip route

You will find the other EIGRP AS routes with EX tag.